BETONPLAST: Mortar Plasticisers

Water-Reducing mortar plasticiser for cementitious mixes

Product Overview

  • Reduces harshness in mixes.
  • Imparts waterproofing.
  • Reduces efflorescence.
  • Detrain air from mixes.
  • Reduces drying shrinkage.

Recommended Dosage

  • 75 ml to 100 ml per bag of cement.
  • 200 Gm per bag of cement.

Standards Compliance

This product complies with Complies with BS-5075 Part I and IS 516 Part 6 standards.

Applications

  • Masonry plaster.
  • Brick laying mortar.
  • General repair mortar

Packaging

Available in 1, 5, 20 Litre. & 200 Gm packaging.

AQUALOC-TPIWA: Water proofing concrete and mortar admixtures

Water-proofing admixture for cementitious mixes and mortar.

Product Overview

  • Decreases the water requirement in concrete mixtures.
  • Enhances workability and cohesion.
  • Improves resistance to water penetration due to hydrostatic pressure or capillary absorption.
  • Minimises drying shrinkage.

Recommended Dosage

  • Use 100–150 ml per cement bag.

Applications

  • Suitable for all reinforced cementitious concrete.
  • Masonry plaster, water-retaining structures, and repair mortar.

Standards Compliance

This product complies with Complies with IS-2645 and DIN 1048 standards.

Packaging

  • Add to gauging water and stir into the mixer last for optimal results.
  • Available in 1, 5, 20, 50, and 200 litre packaging.

BETONFLO-250,260, 270 : Normal plasticisers based on SNF.

Water-Reducing superplasticising admixture

Product Overview

  • Improved workability helps Easier, quicker placing.
  • Increased strength helps high early strength for precast applications.
  • Denser, close textured concrete with reduced porosity and hence more durable.
  • Eliminates Risk of segregation and bleeding minimised, thus, aids pumping of concrete.
  • Safe in prestressed concrete and with sulphate resisting cements
  • Chloride free suits reinforcements.

Recommended Dosage

  • 300 ml to 1400 ml per bag of cement.

Applications

  • All type of pumpable concrete applications.
  • Effecting substantial reduction in water
    1. Resulting in low permeability and high early strength applications.
    2. Use in M 30 grade and above.
  • High workability concrete like SDC for ease of placing.

Standards Compliance

IS 9103:1999 & BS 5075 Part 3, Confirms to ASTM C 494 Type ‘F’ & Type ‘A’ depending up on the dosage used.

Packaging

Available in 1, 5. 20 Litre. & 200 Gm packaging.